John Bedini's Magnetic Gate Experiment

Tests and Results

by Jean-Louis Naudin


TESTS and EXPERIMENTS

a) First TEST : put the magnetic gate in horizontal position, slide your Magnet probe (10x60mm cylindrical magnet) in the plastic tube.you can notice that, when the magnet is pushed North pole first into the magnetic gate, the magnet probe rushs out quickly through the gate than in the other way.

b) Second TEST : put the magnetic gate in vertical position, if you put the magnetic probe ( magnet weight = 22.5 gr ) NORTH pole through the magnetic gate (downward), you can notice that it rushs out directly downward with acceleration, without additional load.

c) Third TEST : put the magnetic gate in vertical position, if you put the magnetic probe ( magnet weight = 22.5 gr ) South pole first through the magnetic gate (downward), you need to add about 35 gr ( 34.5 g in my test) of additional load inside the plastic tube to compensate the repulsive magnetic force.

RESULTS

You have demonstrate with this simple experience that it is possible to extract and build a FREE ENERGY device using the Bedini's Magnetic Gate. The result thrust is 2.85 greater in one way than the other way.


Return to Magnetic Gate menu or Return to Home page