created on January 25, 2005 - JLN Labs - Last update January 26, 2005
All informations in this page are published free and are intended for private/educational purposes and not for commercial applications

(281)
Sujet : Round
Date : 25/01/2005 21:14:03 Paris, Madrid
De : Chris Gupta( South Florida, USA )
A : JNaudin509@aol.com
Envoyé via Internet

bonjour jean

chris gupta from south florida
to build the round lifters properly some important equiptment is necessary.
a steam machine,a hot air gun and a large diameter gasket cutting tool, and i also use aluminum tape with conductive adhesive.
my emitter is aluminum wire 32gage.i have made from 6" dia to 30"dia.



Notes from Jean-Louis Naudin : Congratulations to Chris Gupta for his very good design of a working rounded Lifter and thank you very much to him for the sharing of his experimental tests results for the benefit of all.

(282)
Sujet : long ship
Date : 26/01/2005 15:40:31 Paris, Madrid
De : Chris Gupta( South Florida, USA )
A : JNaudin509@aol.com
Envoyé via Internet

bonjour jean;
chris gupta from south florida

This was very time consuming work, many cells very difficult job.
i left this on my work table and one day my lamp loosened fell on it and crushed it.

Return to the Lifters Builders page