Lifter v3.0 replicated successfully
by Donovan Martin( South Africa )
November 15th, 2001 - JLN Labs
- Last update November 15th, 2001
All informations in this page are published free and are intended for private/educational purposes and not for commercial applications
I have just completed a successful replication of the Lifter v3.0.
It works pretty impressive. I have used 30KV DC , and 0.1mm enameled copper wire for the runner above the aluminium Plates.
I have attached the pictures which you
Note from Jean-Louis Naudin : Congratulations to Donovan Martin for his successful replication of the Lifter v3.0.
See also the :
Return to the Lifters Builders page