Biefeld-Brown Racer and the Lifter1
by Neil McPherson ( USA )
February 5, 2002 - JLN Labs -
Last update February 5, 2002
All informations in this page are published free and are intended for private/educational purposes and not for commercial applications
BB Racer photos...
Here are the BB Racer photos, built exactly the same as the lifter but in the horizontal plane and suspended from the ceiling. Tissue paper is used to fill the back half of the racer. Because it travels at 4 metres per second the BB Racer needs to be reasonably aerodynamic. The nose is a plastic needle this is to add a bit of weight to hold the nose down!
My lifter is a replication of JLN's and works very well.
all the best
See also the :
Lifters builders and tests feed-back
Return to the Lifters Builders page